WASTEWATER TREATMENT BY MULTIPLE EFFECT EVAPORATOR
WASTEWATER TREATMENT BY MULTIPLE EFFECT EVAPORATOR
“Technoforce Solutions (I) Pvt Ltd
offers wastewater treatment by Multiple Effect Evaporator with a stripper, thermo compressor,
axial flow pump and sludge dryer. We are introduce as a Manufacturer &
Supplier of Multiple Effect Evaporator ( MEE )Skid India. Multiple effects Evaporator
& thermo compressor reduce steam
consumption Minimum power requirement. Our main objective is to save your operating as
well as disposal costs, and minimize scaling in evaporators”.
Multiple Effect Evaporator
(MEE) systems :
Technoforce offers Zero Liquid Discharge
System(ZLDS) which is highly
cost-cutting, environment friendly in nature. It is a system consisting of a
stripper column for removal of organic volatiles from the feed stream. It does
so because subsequently when the water gets evaporated, it should have less
organics left as residue.ZLD System also consist Multiple Effect Evaporator (MEE) with a
thermo-compressor for achieving energy economy, and a downstream Sludge Dryer for removing the balance
water, converting the solids into a dry powder which is cheaper and easier to
dispose. The well-designed system saves operating and disposal costs and
minimizesscaling in the evaporators.
The MEE multiple-effect configuration combines 2 or
additional evaporator bodies to conserve steam, that is condensed within the first-effect
device solely. Water gaseous within the first-effect vapor body is condensed
within the second-effect device, that provides energy for evaporation within
the second-effect vapor body (and therefore on for added effects). Vapor from
the last impact flows to a condenser.
The last-effect vapor
body is maintained at a high vacuum with a steam-jet air ejector or mechanical
air pump. The thrust is that the pressure drop from the primary to the last
impact.
For a similar overall
pressure differential and method conditions, the evaporator with additional
effects would force less steam. The evaporation in every impact are going to be
just about zero.7 to 0.9 pounds for every pound of steam condensed within the
first-effect device. For the same type of evaporation rate, a 5-effect
evaporators will require about 25% percent of the steam required for a
single-effect evaporator. In actual follow, the steam economy will vary wide
thanks to variations in feed temperature and alternative energy needs like heats
of dilution and crystallization.
The number of effects is
proscribed by the whole out there temperature distinction between the plant
steam and therefore the cooling water temperature. method liquors with high
boiling purpose elevations generally operate with fewer effects.
Features of ZLDS:
·
50% less power required.
·
70% less energy required.
·
200% improvement in descaling
cycle.
·
Minimum power requirement due to
the use of axial flow pumps.
·
Stripper isolates volatile
organics to reduce COD (Cost of Disposal).
·
Sludge dryer converts TDS to dry powder.
·
Modular skid mounted systems
reduce the site activity to a few weeks.
Applications of ZLDS:
·
Concentration of effluent (waste)
water having high TDS.
·
Concentration of organic and
inorganic solutions bearing salts.
·
Evaporative crystallization.
·
Drying of sludge for obtaining
easy to dispose solids.
·
Treatment of large quantity of
waste water with steam economy.
For More
Information About Multiple Effect Evaporator System
CONTACT
Technoforce Solutions (I) Private Limited,
Visit our site at: https://www.technoforce.net/
Tags: Multiple
Effect Evaporator System , Multiple
Effect Evaporation Plants , Multiple
Effect Evaporator For Effluent Treatment , Multi
Effect Evaporators MEE , Multiple
Effect Evaporator Manufacturers , Zero
Liquid Discharge Systems , Sludge
Dryer
Comments
Post a Comment